(H)JDW2 type outdoor low-voltage isolation switch is a single-phase AC 50Hz low-voltage switchgear, used for power systems with rated voltage below 1kV, as a voltage without load to switch on or isolate the power supply. The isolation switch is operated with an insulating rod.
(H)JDW2 type outdoor low-voltage isolation switch is a single-phase AC 50Hz low-voltage switchgear, used for power systems with rated voltage below 1kV, as a voltage without load to switch on or isolate the power supply. The isolation switch is operated with an insulating rod.
(H)JDW2 type outdoor low-voltage isolation switch is a single-phase AC 50Hz low-voltage switchgear, used for power systems with rated voltage below 1kV, as a voltage without load to switch on or isolate the power supply. The isolation switch is operated with an insulating rod.
35kV, 66kV, 110kV, 220kV windproof composite series products are suitable for high voltage line hard jumper, can effectively prevent the jumper wind deflection, wire dancing with the wind, to ensure the insulation distance between the phase and the ground, also called hard jumper insulator, to eliminate the jumper caused by line trip, wire arc burn, broken strands, broken wires and other phenomena.
FSJ3-66/10A:66 FSJ4-66/8A:66 FSJ2-110/8A:110
FSJ3-66/16:66 FSJ4-66/16B:66 FSJ2-110/12.5B :110
8.7/15kV full shrinkage cable terminal
DTL-10:8.4 DTL-16:8.4 DTL-25:8.4 DTL-35:10.5
Box-type substation, also known as pre-installed substation or pre-installed substation.
Outdoor box type opening and closing using prefabricated live can touch silicone rubber cable head, fully sealed, fully insulated, maintenance-free reliable guarantee of personal safety.